Manual Range 1000V Digital Smart Multimeter Sine Wave Signal RMS
Measurement
Manual Range 60Hz Digital Multimeter With 9V Battery (6F22)
Description:
Ambient temperature: 23 ± 5 ℃ Relative humidity: <75%
3.2.1 True rms zero input
3.2.1.1 The measurement of sine wave signal, the use of true RMS
measurement method than the traditional average response method
error is small.
3.2.1.2 True RMS The instrument can accurately measure the sine
wave signal, but if it is on the AC function, the instrument may
display 1 to 50 if the measured signal is not input (shorted at the
AC voltage range and the input terminal) Word between a reading.
These deviations are normal. Within the specified measuring range,
they do not affect the accuracy of the multimeter to measure
alternating current.
3.2.1.3 True RMS requires that the input signal reach a certain
level for measurement. Therefore, the AC voltage and current range
is specified between 2% and 100% of full scale.
GENERAL
The instrument is a stable and good performance digital multimeter
driven by battery.
It uses the LCD with 63*31mm figure to make the reading clear. Unit symbol
displaying, backlight and the function of overload protection make
operation is
convenient.
The instrument has the function of measuring DCV, ACV, DCA, ACA,
resistance,
capacitance, inductance, temperature and frequency, and diode,
triode and
continuity test. The instrument takes dual-integral A/D converter
as key point, is an
excellent tool.
Specification:
| DC current | 2mA/20mA/200mA/20A |
| AC current | 2mA/20mA/200mA/20A |
| DC Voltage | 200mV/2V/20V/200V/1000V |
| AC Voltage | 200mV/2V/20V/200V/750V |
| Resistance | 200Ω/2KΩ/20KΩ/200KΩ/2MΩ/20MΩ/200MΩ |
| Capacitance | 20mF |
| Temperature | -20 to 1000°C, -4 to 1832°F |
| Frequency | 60Hz |
| Operation mode | Manual range |
| Maximum display | 1999 |
| Power | 9V battery (6F22) |
| Display size | 63x32mm |
